Frequently Asked Questions
|[ Index | Download | Buy | Description | Requirements | What's New | Links | Awards | FAQ | Contact ]|
Here are some questions that i get asked frequently. See if it's in here first, before you mail me. Topics are:
Most probable cause is the volume setting.
There should be a "speaker" icon next to your clock on the task bar. (If not, use Start/Programs/Accesoires/Multimedia/Volume). Double click it to pop up the mixer panel. Choose Options, Properties, and select "Recording" for "Adjust volume for". Then, make sure all the volume controls in the bottom box have been checked. Click OK. The panel now allows you to select recording volumes and sources. Make sure that "Line in" (or Auxiliary) is checked and used as only input. Now it should work.
You'll have to do this with the mixer program for your soundcard. It is hiding under the speaker icon next to the clock (see the previous question).
Easiest way is to just use the "Start recording at" value in the Record dialog. This requires the machine to remain powered on until the recording starts. If the machine needs to be turned off in between, you can use the following method.
You can schedule a recording by using the Task Scheduler of Windows. You can
find it under the MyComputer icon (in Windows 98 and 2000). Add a new item, and
point it to the CD Wave program (usually
"C:\Program Files\CD Wave\CDWAV.EXE"),
which should be listed already. Use the "Advanced" scheduling settings to
supply the extra configuration data.
As commandline parameters, use the following:
...CDWAV.EXE /R "C:\My Music\MyRecording.wav"
This will start recording at the given time to the MyRecording.wav file. The settings will be used from your last recording settings, including the format, voice-activated start, stop on silence, and maximum recording interval. You can change some of the parameters using the following switches:
/RRecording mode, records to the given file (which will be overwritten if it exists)
/SStop-on-silence, suppy /S to switch on, /S- to switch it off
/VVoice activation, suppy /V to switch on, /V- to switch it off
/QQuit after recording, exits CD Wave immediately after recording stops
/TTime. Specify hours:minutes (or just minutes) for the recording duration
Example: This starts recording to "C:\My Music\MyRecording.wav", for one and a
half hour, starting immediately and continue recording even if silent, and will
quit CD Wave when it is done:
...CDWAV.EXE /R "C:\My Music\MyRecording.wav" /T1:30 /S- /V- /Q
There can be several causes for this. Let me name a few.
Some soundcards are incapable of delivering "full scale" samples. This means that analogue parts will clip the sound before they get to the A/D convertor. An example is Creative's AudioPCI card with the 1373 chip. This section of the LP to CDR tips page contains some more information on this topic.
Merging is not yet possible, this is on the wish-list for version 2.0. You can download a freeware program to do the merge quite easily. You can find "WavMerge" on Mike Richter's CDR Resources, files page, under the "Audio files" section.
This happened when you try to convert from 24 bit or multichannel audio to other formats (16 bit). For some reason, Microsoft's built-in sample rate converter cannot handle 24-bit audio yet. There is a better converter in CD Wave, which does all the resampling and conversions by itself, in 1.93 so you should no longer see this error. Internally, CD Wave uses 32-bit processing for all tasks.
Definitely not. Many CD recording programs are unable to process 24-bit audio at all. On most systems, CD Wave cannot convert to 16 bit either. The quality difference between 24 and 16 bit is not as much as hardware vendors will want you to believe, the gain is mostly in allowing more room for processing the audio and for more dynamic range, the difference between soft and loud passages. So if your target is to record a CD, use 16 bit.
Microsoft defined a new standard for 24-bit and multichannel audio. The rule is that any format that either uses more than 2 channels or more than 16 bit must use the new standard. CD Wave is following on this rule, and writes out WAV files this way. The new format allows to describe what speakers are being used, and how the data bits are ordered.
Many programs do not understand the new format, but use the old format descriptor for a 24-bit WAV file. CD Wave will take an educated guess at the bit ordering and channel assignments, and open the old format. However, it will always write out files in the new format. The effect is that you can playback the files that CD Wave produces with Media Player, but you cannot open these 24-bit files in Sound Forge, for example.
When writing a 24 bit file (without conversion), there is a setting to force CD Wave to write out a "backwards compatible" WAV file for 24-bit stereo files.
MP3 files hold audio in a comressed format. CD Wave currently cannot handle compressed audio data. In order to use CD Wave on the files, you will have to convert them first. Note that the decoded files will be much larger than the compressed versions.
A freeware program that will let you play and convert various formats is WinAmp. To convert a file, playback the file using the WAV file writer as output device (instead of the sound card). To do this, do the following:
You probably burned the CDR in Track-At-Once mode. In this mode, you can append each track individually, but as the recorder turns off and on between writing each track, it also inserts a pause in between.
To get a continuous live recording, use Disc-At-Once mode while recording. All tracks on the CD will be written in a single pass, and no pause is inserted between them. Drawback is that you cannot append any more data or audio after a DAO recording.
In general, you will have received some CD authoring program along with the CD recorder. These usually can burn audio CDs as required.
A CD audio disc is divided into sectors. Each sector holds 1/75 seconds of audio, or 588 samples at 44100 samples per second, or 2352 bytes. If the size of a WAV recording is not a multiple of 588 samples, the recording software will fill the remainder of the sector with zeroes. If you have a continuous recording (live), you’ll hear a short click in between two songs, as a result of the padding zeroes. To prevent this, the program always cuts on 588 sample borders, so two adjacent songs will have no clicks in between.
The reason is that each wave file also contains a header with information on the type of encoding used, the sample rate, the number of samples in the file, the number of channels, etcetera. This header is about 52 bytes in size, but may vary. The last file of a set may also be not aligned, because the original data wasn't, and CDWave does not add extra padding data to the file.
No (2x). Splitting on 2352 borders makes sense, just clipping does not.
If the tracks have no relation, i.e. their sound is not continuous, the only way to avoid a click is to make sure that the first track ends in silence and the next starts with silence. You do not have to clip the wave, because the CDR software will pad the remainder of the last sector with silence.
No, there's no Mac version of CD Wave. Since the application was written in Delphi, and is also closely coupled to the Windows API, it will be very hard to port to begin with. Currently, porting would mean completely rewriting the whole program.
However, I received reports that the program runs fine under a Windows emulator on the Macintosh, called Virtual PC, made by Connectix.
There are no plans to create a Linux version. Though there is a Linux version for Delphi now, called Kylix, porting CD Wave to linux means a lot more than just recompiling it. In order to get the maximum performance, CD Wave uses many Windows API calls directly, which increases throughput considerably (up to 50% faster loading on low end systems). Also the multimedia parts were programmed directly on the Windows API and make up a large portion of the program's code.
Donwload the shareware version of CD Wave, it won't expire or so. Contact me, and mention your name and city where you live (or lived, if you moved after registering). It may take a few weeks to process your request. You will receive a registration key.
Yes, if you register any 1.xx version, you are allowed to upgrade to any 1.xx version at no charge. Thus, if you registered 1.56 one day, you can download and use 1.62 and continue using it without having to reregister.
If you register (and pay) online, you will be able to download a registered copy (it mentions this fact in the About box). Your registration information will be forwarded to me, so for future versions I know that you're entitled to use them. Starting with version 1.73 you receive a registration key. With this key, you can change the shareware version into a registered version. If you registered a previous version, contact me, provide the name, place and e-mail that you used for registration and you'll receive a key in a few weeks.
You must be a very well educated person to make this not sound like a threat. Basically, you cannot bend the rules. You can register the program "as is", which entitles you to a number of free upgrades. If you do not like the program, or feel that some key function is lacking, do not hesitate to write me. But please do not use the above wordings, even if your intentions are good. Actually sending the registration fee does a lot more to encourage me to further develop this product than a promise of sending me money only if I spend some time building a function.
Apart form the CD Wave project, I have a full-time job, a house to take care of, various pets, a girlfriend, and I play in a percussion group, a sort of brassband, i sport a little too. So that means that there are times that I cannot reply in time to each and every request. If you feel I've forgotten you, just drop me an e-mail, and i'll let you know as soon as possible if i can find you in my database.
I registered it at NameSecure's Domain Name Registration .
I used Inno Setup, a great and free program by Jordan Russel.
The links section contains a list of useful sites
Page created by Mike Looijmans.
Back to index page